The walkway below is made with the Winter Blend, Keystone Venetian antiqued four piece random pattern that consists of 6x6, 6x9, 6x12,...

For the step risers we are using chiseled strip red flagstone set in mortar. The end of the strip flagstone needs to be chiseled off at...

We removed the bender board, steel stakes and wood stakes from the concrete and now we are ready to start laying the flagstone. On the...

We used about 100 bags of concrete and it took about 7 hours for three guys to mix and finish the concrete pour.

We built up the base that the concrete will be laying on with road base and dirt and used a jumping jack and a little water to compact...

We are building the foundation of the circular steps from concrete. The steps will have 12" treads, 7 1/2" rise and a 30 square foot...

The photo is of finished dimensional Pennsylvania Blue Flagstone with sizes of 12 X 12, 12 X 24 and 24 X 24 in a random pattern that is...

We use a demo saw to cut the edges of the flagstone and set up a string to get a straight line as we are about ready to set the stone in...

We set the flagstone in mortar and used 1/4" spacers much like setting tile to get consistent gaps between the stone. It was a real tick...

Here is a look at the concrete base for the flagstone foundation. The concrete does not need to be finished as and can be left with a...

On this job we had considered re-using some of the flagstone but it was not cost effective in doing the dimensional sizes in 12 X 12, 12...

This photo is of the demo of the old entryway where we had to jack hammer the old concrete base and remove the old flagstone. The black...

Check out the before and after pictures. This turned out to be a really nice improvement in the patio.

The flagstone has been cut and put into place. The flagstone was hand selected for a thickness between 1 1/2 " to 1 3/4" thickness. The...

We are installing red flagstone over existing concrete. The area had to be prepped and covered with plastic to protect the already...

This is the before photo of the concrete patio that will will have red flagstone added over the top of the concrete.

The boulder fire pit is finished with each precision cut piece put into place. The outer circular edge was left irregular to provide the...

This circular flagstone Onyx fire pit is nearing completion. If you look close, you can see the gas burner in the Onyx boulder. The...

The flagstone patio is design is circular and a lot of stone cutting is needed to get the tight joints and circular shape. The patio will...